AC180: Power You Can Always Rely On
1440W Flash Charging
No bulky power supply, a single cable is enough to charge the Bluetooth AC180 with a maximum of 1440 W. 1440 W fast charging power fully charges the Bluetti AC180 1152 Wh in 1.3-1.8 hours.
Solar Fast Charging
integrated MPPT charge controller for up to 500 W solar power allows full charge in 2.8 – 3.3 hours. Faster full charge in 1 hour thanks to AC + PV double charge with 1800 W max.
Reliable UPS
AC180 has an advanced UPS function that restores power immediately with a switching time of 20 ms, so you don’t have to worry about power outages.
9 Versatile Outputs
Output up to 1800W power – includes AC socket, USB Type-A and Type-C and wireless induction charging. All device plugs are supported. With pure resistive loads, AC output can be up to 2700 W.
FAQ
Q1: How do l know whether my devices will work well with this product?
A:Please evaluate the total constant load of your devices. ifit doesn’t exceed the Max.output power of AC180 (1800W), you can use this power station to run your devices.Note: Some devices with built-in motorcompressor may start at 2-4 times the rateooower, which can easily overload the AC180
Q2: Can l use third party solar panels to charge this product?
A:Yes, you can. Make sure your solar panels have an open circuit voltage of 12V-60Vand have the MC4 connectors. Please do NOT mix different types of solar panelsNote: Time required for one full charge depends on weather condition, the sunshineintensity and the angle of solar panels
Q3: Can it charge and discharge at the same time?
A: Yes. It supports pass through charging.AC180 comes with the premium LiFepO4battery and proprietary Battery Management System to ensure that it can chargeand discharge at the same time.
Q4: What is ECO mode and can l turn it off?
A: ECO mode helps save power, and you can turn it on or off on the screen. Whenoperating on ECO mode, the AC/DC output will automatically turn off if the AC180 isbearing low or no load for a while. You can set the power threshold of AC output andDC output to 15 30W 5-10W, respectively, for 1, 2, 3, or 4 hours.
Q5: Why is the charging power often too low?
A: AC180 has a built-in intelligent BMS that automatically adjusts the charging powelin resoonse to the battery temperature and SoC. thus protecting the battery andextending its service life
Q6: Can I make the AC180 less noisy when charging?
A:Yes. Select “Silent” for AC charging in the BLUEITl app. Please refer to 4.3.1 ACCharging for more details.
Q7: When should I use the Grid Enhancement mode?
A:This mode is handy when charging the AC180 via an unstable AC source, such as anunreliable grid or generator.E.g. If you change the generator’s output while charging the AC180, the woltage dipwill also cause the charge to fail.
Reviews
There are no reviews yet.